This series low frequency (power frequency) power inverter 1KW-6KW has been proved most reliable and robust for loads like air-conditioners, driller, heater with low frequency transformer and simplest but functional circuit! They are built-in AC charger, AC auto-switch-over UPS, priority setting, battery type setting, settable AC charging current,Grid AC or Genset/generator input! What's more,10-year life pure copper transformer and easy to replace PCBA boards make them unbeatable even under terrible environments! Make you count on it without any worry!

Features
Robust overloading ability up to 300% (20 sec.)
Low quiescent current, power saver mode
3- steps intelligent battery charging
Uses PFC(power factor correction) for charger
10ms typical transfer time
15sec delay before transfer when AC resumes
Battery/AC priority switch Available for off grid solar/wind system
Auto Generator/Genset Starter(Dry Contact)
Remote Control by RJ11 switch
8 Battery types Selectable

Full Protection:
Reverse connection,Overloading, over-voltage, low voltage, over current, short-circuit, over heat, grounding, batttery detect etc.

Input
Max AC Charge Current	20A-75A(Selectable)
AC input	194-243Vac,47-57Hz or 55-65Hz
Output
Output Frequency	50/60Hz±0.3
Output Power	10KVA/5KW
Output Voltage	220/230/240Vac±10%
Output Phase	1
Power factor	0.9-1
Harmonics (THD)	<5%
Battery information
Battery rated Voltage	48Vdc
discharging Stop Voltage	42Vdc
Overcharge Protection	62.8Vdc
Efficiency
inverter Efficiency	88%
Protection
Electrical protection	reverse input, overloading,short-circuit, over-heating
Ingress Protection	IP20(indoor installation)
Mechanical Data
Communication Port	RJ11/232(optional wired remote control)
Net/Gross Weight	43kg/45kg
Dimension	218X180X442mm
Environment
Humidity	5% to 95% Relative (Non-condensing)
Operating Temperature	-20°C-55°C